61 Series Polyurethane Filled Wheel
61 series polyurethane filled polyamide body wheels and castors, with a non-marking structure made of blue polyurethane tread, 85 shore A hardness, are resistant to friction and wear thanks to their excellent rolling and elastic strength.
Since the wheel body is made of polyamide, the shaft bearing can be self-bearing. There is also a type with roller balls that are housed in the shaft bearing of the wheel for stationary heavy loads. (Stainless type is also available)
There is.)
The double protective capped ball bearing that centers the shaft bearing protects the bearing from dust and dirt, while the reinforced polyamide bush acts as a protective felt on both sides, protecting the bearing from abrasives and residues.
It is suitable for cars that constantly carry medium loads. It guarantees minimum effort thanks to its excellent rolling resistance in towing or manual applications. It is possible to reach speeds of up to 6 km/h with the ball bearing shaft bearing type.
Suitable for continuous use for washing and sterilization processes inside and outside the factory. Used in food and chemical industries, transport carts and mobile scaffolds. (Customized UNI EN 1004:2005 safety certified)
Resistant to salt water solutions, alcohol, glycol, mineral and organic acids in industrial environments.
It is suitable for ceramic and concrete floors, but not for soil floors with residue.
Since the 61 series wheel has a softer hardness than the 60 series, it is more suitable for use on uneven surfaces.
This product does not damage the floors and does not leave any marks.
Since the wheel body is made of polyamide, the shaft bearing can be self-bearing. There is also a type with roller balls that are housed in the shaft bearing of the wheel for stationary heavy loads. (Stainless type is also available)
There is.)
The double protective capped ball bearing that centers the shaft bearing protects the bearing from dust and dirt, while the reinforced polyamide bush acts as a protective felt on both sides, protecting the bearing from abrasives and residues.
It is suitable for cars that constantly carry medium loads. It guarantees minimum effort thanks to its excellent rolling resistance in towing or manual applications. It is possible to reach speeds of up to 6 km/h with the ball bearing shaft bearing type.
Suitable for continuous use for washing and sterilization processes inside and outside the factory. Used in food and chemical industries, transport carts and mobile scaffolds. (Customized UNI EN 1004:2005 safety certified)
Resistant to salt water solutions, alcohol, glycol, mineral and organic acids in industrial environments.
It is suitable for ceramic and concrete floors, but not for soil floors with residue.
Since the 61 series wheel has a softer hardness than the 60 series, it is more suitable for use on uneven surfaces.
This product does not damage the floors and does not leave any marks.
Push & Pull Forces According to Wheel and Diameter
The table shows how much pushing and pulling force is needed for each load and diameter. Each wheel has a fixed speed capacity of 4 km / h. In manual use, a pushing and pulling force of a 4-wheeled vehicle requires < 5 daN. In frequent use, a force of < 3 daN is required.
Fork and Body Models
Stainless Steel Models
Products That Can Be Custom Made
Be the first to review this product!
Recommended Products
New
New
New
New
New